Using a 1000W Dummy Load can save you a significant amount of money on your antenna systems, but it is essential to select the correct one. Here are some guidelines to help you choose the most cost-effective dummy load.
-96,36,37,38,39,40,41,42,43Earlier today, I received a KU-Band dummy load on my Apollo 1000 Watt KU-Band. It took me a couple of minutes to figure out how to operate the system, but once I got it figured out, I was ready to do the load.
When you operate the KU-Band, you need to be able to open the S-Band antenna and display. The SUIT GAS RETURN and SUIT GAS DIVERTER lights should come on in a minute. Also, you need to open the DISPLAYS and HEATERS.
You also need to be able to turn the FUNCTION switch on and off. You need to make sure that you have breaker breakers set for this procedure. It's best to have an omni antenna. If you do not have one, you can use a PLSS bat up there.
I had to wind up the system a couple of times. I'm a good PLSS bagger, so I didn't wind up too badly. The rig is finally getting rigged.
TEM 1000W Dummy Load: The TEM 1000W Dummy Load is a reasonably priced, and relatively easy to install, multi-channel dummy load. Available in both 1+5/8 and 7/8 connector types, this dummy load is well suited for N+1 installations. It boasts a nice selection of features, including an on/off switch, 115 vac fan cooling, and a scope tap "N" female connector. This model also features a 225degc over-temperature thermal switch, making it the most functional of the lot.
TEM 1000W Dummy Load: This dummy load features a variety of features, including an on/off switch, scope tap "N" female connector, 115 vac fan cooling, and 24 Carborundum resistors. With a price point of $2500, the TEM 1000W Dummy Load will be a wise investment for your next test set-up. Featuring a 50 Ohm impedance, this dummy load can be used with virtually any type of speaker. As a bonus, the TEM 1000W Dummy Load comes with a free sample of TEM's latest line of TEM Microwatt amplifiers.
Radio transmitter output power and vhf radio antenna splitter is absorbed by the MFJ 264 Dummy Load. It is compatible with all radios and is capable of handling 1,500 watts for 10 seconds. Additionally, it is compatible with QRP radios from 160 meters to 650 MHz.
Another dummy load capable of handling up to 2,000 watts for one minute is the Palstar DL2K 2,000 Watt Dummy Load. It features fan cooling controlled by a thermostat. It can be operated in a continuous mode or switched on for intermittent use. It comes with a warranty from the manufacturer. This dummy load also includes premium transformer oil. The label displays the power versus time graph. This is an excellent device for testing your high-power amplifier.
The Palstar DL5K dummy load is the successor to the Palstar DL2K. It can withstand up to 5000 watts for up to 30 seconds. It also features dual fan cooling with thermostatic control. It permits tuning a high-power amplifier without removing the dummy load. In addition, it features a Hyperbolic Cone that enables operation at frequencies as high as 500 MHz.
Hefei Topwave Telecom Co., Ltd. is an internationally renowned designer and manufacturer of RF passive devices like DAS Antenna, is the leader. Topwave Telecom produces a variety of products, including power splitters/power tappers as well as directional couplesrs, and hybrid couplers which can be adjusted to a different frequency. The quality control of the raw materials, assembly, as well as the entire production is extremely rigorous. This guarantees that top quality is a constant goal.
Topwave Telecom's VHF,UHF,and PS700/800MHz frequency bands components have been extensively deployed across a variety of critical communications networks in order to provide emergency and secured communications services in public safety areas such as Fire, Police, and other government agencies. for law enforcement agencies where rapid response times are critical in a situation which could be life or death, reliable communication equipment like Notch Filter is crucial. Topwave recognizes that reliability is an important factor when designing public safety equipment.
Topwave is a leading Telecom & RF product manufacturer like Omni Antenna that offers networking and communications services to customers all over the globe. We offer and manufacture top-quality, high-performance antennas that have outstanding performance. We are among the top suppliers of 5G communications products in Hefei (China). The breakthrough in technology by Topwave has proven to be a game changer for the world of telecommunications. We are able to create, manufacture, trade, and offer services that increase the value of connectivity.
Hefei Topwave Telecom Co., Ltd. also manufactures base station antennas such as MIMO Antenna. We have the expertise and reliability to meet your needs for sophisticated in-building communication systems. Indoors and outdoors, we can install DASs for services requiring limited coverage. Topwave Telecom is your reliable strategic partner and RF (radio frequency) communications expert.
Copyright © Hefei Topwave Telecom Co., Ltd. All Rights Reserved. - Privacy policy | Terms and Conditions
Tel: +86-13818555291
E-mail: [email protected]
Sales Representive Office: 1568 Century Avenue, Pudong New Area(200120), Shanghai.
Manufacture Factory: Building C1# Liheng Industry Park, Hefei(230061), China.
EN
ES
PT
SV
DE
TR
FR
