|Place of Origin:||China|
|Certification:||ISO9001, ROHS, CE|
The dummy load is a terminator that absorbs all incident wave power, so it is equivalent to a characteristic impedance line connected to the terminal. Common matching loads include waveguide matching loads and three-plate line matching loads. Compared with the partial absorption of energy by the attenuator, the matched load absorbs all the energy and the frequency band is wide enough. The resistance value of the coaxial matched load is usually 50Ω.
Low PIM RF Dummy Load widely used for network installation and T&M applications, the load also called cable load, cause it is made of low PIM cable like RG141. Also the load has different power rating from low to high, Topwave model TPW-LPT50-740-160-41M, it is a 50W wideband 698-4000MHz with low PIM -160dBc in 4.3-10 type connectors
|Power Rating(W)||50W (average power per port)|
|Operating Tem(℃)||-25°C to +50°C|
|Dimensions(mm)||See mechanical Drawing|
ROHS & CE Compliance
Guaranteed PIM Guaranteed -160dBc
Wide Frequency Band Covering 698-4000MHz
Low Insertion Loss & Low VSWR
Available with Type N, 7/16DIN or 4.3/10 Connectors
Widely for Distributed Antenna(DAS) Solutions.
Well Installed in In-building System(IBS)