600-3800MHz 10dB Low PIM RF directional coupler with 4.3-10 type

Directional Coupler This is a 2×2 3-port or 4-port coupler, and its function is to take out the optical signals transmitted in different directions in the fiber respectively. The optical signal is transmitted from terminal 1 to terminal 2, a part of which is output from terminal 3 and no output from terminal 4; the optical signal is transmitted from terminal 2 to terminal 1, a part of which is output from terminal 4 and no output from terminal 3. Directional couplers can be used as splitters, not as combiners.A directional coupler is a microwave device that is widely used in microwave systems. Its essence is to distribute the power of the microwave signal according to a certain proportion.Cavity directional couplers are widely used in communication, radar and indoor distribution systems, the company has a large number of cavity couplers, as well as all accessories, a large number of stock, operator-specific brands. Frequency 600-3800MHz, support 2G, 3G and 4G and WLAN engineering construction needs.

Topwave directional RF couplers are available with Type N, 7/16DIN or 4.3/10 connectors, coupling values is 6dB,8dB,10 dB,,15dB,20 dB and 30 dB. Topwave directional RF couplers are rated at 200w and have frequency ratings ranging from 600MHz to 3800MHz.

ROHS & CE Compliance

Wide Frequency Band Covering 600-3800MHz

Low Insertion Loss & Low VSWR

High Directivity

Available with Type N, 7/16DIN or 4.3/10 Connectors

Widely for Distributed Antenna(DAS) Solutions.

Well Installed in In-building System(IBS)